Automatic baling machine is an indispensable part of modern production, which can greatly improve production efficiency and reduce manual operation costs. However, sometimes we encounter some problems, such as the automatic baler does not automatically feed the tape. So, what are the reasons why the automatic baler does not automatically feed the belt?


First of all, we need to check whether the conveyor wheel of the automatic baler is faulty. Under normal circumstances, the conveyor wheel will be worn or stuck, resulting in the automatic baler can not normally feed the belt. At this point, we need to check and replace the conveyor wheel.


Secondly, the electromagnet of the automatic baler may have problems. The electromagnet is an important part of the automatic baler, which can control the strength and time of the belt. If the electromagnet fails, it will cause the automatic baler to fail to feed the tape normally. At this point, we need to check and replace the electromagnet.


In addition, there may be foreign objects or blockage between the conveyor pulley and the conveyor belt of the automatic baler. Foreign matter or blockage will cause the conveyor belt to fail to operate normally, thus affecting the normal work of the automatic baler. At this time, we need to check and clean the conveyor wheel and conveyor belt.

Finally, the electrical system of the automatic baler may also have problems. The electrical system is the core part of the automatic baler. If the electrical system fails, the automatic baler will not work normally. At this point, we need to check and repair the electrical system.


In short, there are many reasons why the automatic baler does not automatically send belts, and we need to analyze and investigate according to the specific situation. In the process of investigation, we can check in accordance with the above aspects, and under normal circumstances, we can find the root of the problem and solve it.