In the daily use of the sealing machine will inevitably appear some minor faults, here to introduce you to the automatic sealing machine card box how to deal with:
1, the width or height adjustment is too small: the automatic sealing machine is manually adjusted the corresponding width and height when conveying the carton, but in the adjustment process because the operator is not familiar with the machine or there is an error in the operation, it will cause the phenomenon of the card box. At this time, we only need to put the carton on the workbench surface of the box sealing machine, and then compare and adjust to ensure the length of the conveyor.
2, the carton is too light, can not pass the movement: In order to fully understand the performance characteristics of the equipment should fully understand the advantages and disadvantages of its performance or directly say the working principle of the box sealing machine, the principle of the automatic box sealing machine sealing tape is by the box sealing machine to press the carton in the process of conveying the impact of the belt roller, so as to achieve the tape sealing to the carton. However, in this process, if the weight of the carton is too light, it will not move the guide roller, so it will directly lead to the phenomenon of card box.
3, tape cutting continuous: the cutting knife is not sharp, resulting in continuous cutting tape, and tape cutting continuous will lead to the carton stuck in the sealing machine can not continue to transport. We need to clean or replace the cutter regularly to ensure the sharpness of the cutter, because after the automatic sealing machine is used for a period of time, there will be a lot of tape debris and dust on the cutter, so it needs to be cleaned up in time.