First, in the sealing process, the box runs off, resulting in the tape can not be evenly distributed on the two folding covers, affecting the sealing effect.


1, the reason: the speed of the two conveyor belts is not the same.
Method: The speed of the two conveyor belts can be adjusted to the same.
2. Reason: the bolt spacing of the belt bracket is too large.
Method: Reduce the bolts of the support. In order to ensure the stability after debugging, a fixed nut can also be installed on the bolt.


Second, after the sealing of the box is completed, the folding Angle of the tape appears pleated.
1, the reason: the tape above the head is not fixed.
Method: Reduce the tape tension of the machine head.
2. Reason: the speed on both sides of the conveyor belt is not the same.
Method: Adjust the speed on both sides of the conveyor belt until it is consistent.
3. Reason: The tension of the tape is adjusted too much.
Method: Adjust the head to make the tension of the tape a little softer.
4, the reason: the action of the cutter and the roller is not coordinated.
Method: Adjust the distance between the cutter and the roller, and the roller starts to flatten the tape immediately after the cutter is cut off.