Today we will talk about how to maintain and maintain the unpacking machine:
1, in the installation of machinery and equipment must be strictly in accordance with the product instructions to operate, to ensure that each part is installed in the correct position, the gap distance between each part is reasonable.
2, the need for regular manual inspection and cleaning of the cutter. Check for oxidation, absence of imperfections and other impurities such as dust cover; Keep the knife blade sharp to ensure its smooth working.
3, check the items in the box in the unpacking machine to see if there is any missing slag, so as not to affect the normal use of the unpacking machine.
4, reducer quantitative refueling. The amount of fuel should be located in the center of the oil mark, and too much will affect the normal operation of the unpacking machine. The above maintenance can effectively extend the normal service life of the unpacking machine and ensure its work efficiency.
5, to reasonable regular lubrication for the structure of the joint, such as the bottom transmission chain and the front column components in the bevel gear should be butter once a week, every two months to the screw, cylinder piston rod and its end ball bearings add grease. Because the use of the unpacking machine is strong and the cutting time is long, the maintenance and lubrication of its key position must be paid attention to, so as to ensure the continuous and efficient work of the machinery.