Although the failure rate of the box sealing machine is very low, if the use of a long time, more or less there will be some small problems, small failures, today we understand what the small failures of the box sealing machine will be, and then how to solve the problem when there is a problem, to ensure that production efficiency is not affected.
First, the sealing machine tape can not completely glue the box possible reasons:
1, the tape is not qualified;
2, the main spring is too loose;
3 The drum shaft has accumulated viscose and can not work properly.
Solution: Replace the tape, tighten the main spring, and smooth these roller shafts.
Second, the box of the font sealing machine is stuck in the middle of the possible reasons:
1, the automatic spring is too tight;
2. The adjusting nut of the belt wheel is too tight;
3. The height of the box is not adjusted reasonably.
Solution: Loosen the main spring, loosen the adjusting nut of the belt wheel, and adjust the height from the beginning.
Third, the tape is disconnected in the sealing process of the box sealing machine?
Possible cause: The blade extends too long; Solution: Adjust the blade orientation;
Four, sealing machine tape is not on the center line?
Possible cause: one-way wheel is broken; Workaround: Replace the one-way wheel.